All DMX versions use the same modules.
Each module connects to the matrix with 4 inputs and 4 outputs. In case
of AES or SPDIF each input and each output has 2 channels.
8-channel ADAT signals can be routed using the MOP4 module. In this case each in and each out has 8 channels.
With only 4 MOP4 modules you can build a 16 x 16 ADAT patchbay.
If conversion between 8-channel ADAT format and AES or SPDIF is needed, please refere to the MQA module.
converting modules MQA MQT MQ4
The MAES module offers 4 transformer balanced IN/OUT, which meet AES specification:
- impedance 110ohm
- input sensitivity 200mV
- 3V minimum output
- connector: 25 pin D-SUB
The MCO4 module offers 4 unbalanced IN/OUT, which meet SP DIF specification:
- impedance 75ohm
- input sensitivity 100mV
- 0.5V minimum output
- connector: coaxial RCA
The MOP4 module offers 4 optical IN/OUT, which meet SP DIF specification as well as ADAT specification.
In case the MOP4 is used for ADAT signals, 4 ADAT IN/OUT can be connected to one MOP4 module.
The MO22 module offers 2 RCA and 2 optical IN/OUT, which meet SP DIF specification. The optical IN/OUT also may be used for ADAT signals.
© 2018 Friend-Chip